1. An injection mold maker with stable performance;2. Auxiliary equipments meeting the requirements of use (dryer, freezer, shredder and mixer, etc);3. Selection of suitable plastics;4. Fine injection...
Step 1:Prepare plastic materialsAccording to the appropriate proportion, a fully mix of the new raw plastic materials and the recycled materials are given by the mixer and then the plastic raw materi...
1. Injection deviceThe injection device is the core part of the injection mold maker. Its function is to ensure that the materials are heated, plasticized and melted quantitatively on time; and then t...
Plastics commonly used for injection molding are classified as thermoplastics and thermosetting plastics. Injection moulding machines use these two plastics to make all kinds of needed plastic product...
If there are professional plastic injection equipment and relatively skilled injection experience, the product will be flawless. Even so, it is the processing technology that the decisive factor in in...
At present, small and medium-sized workshops are emerging in China's injection molding industry. Facing so many choices, many customers will doubt whether the quality of injection molding can be g...
The injection molding mold is a kind of mold with which can products be manufactured. However, most of us, except professionals, do not know how the mold is produced.Mold has an irreplaceable effect o...
Injection molding mold is the mother of industry. With the injection molding mold, plastic products that we need can be manufactured through plastic injection. And the injection molding is featured wi...
Cracking of injection molding mold, including filamentous cracks, microcracks, abnormal whitening on the surface of the parts, and cracks caused by the mold being glued with parts and flow channel. Ac...
Deformation, bending and twisting in plastic injection occur mainly because that the shrinkage rate in flow direction is larger than that in vertical direction during plastic forming. And warpage is a...
The design of two-color mold is a pain for designers! If you want to design a perfect two-color mold, the cost will be high; if the design is too simple, the strength of the two-color mold may be affe...
2. Moulding Method of Customer's Injection Molding Machine.Generally, the moulding methods of plastic injection moulding machines are press moulding, screw moulding, hydraulic moulding, magnetic m...
Injection moulding die makers own many new injection technology, but weld marks still occur during injection molding.The weld lines of plastic products are caused by the incomplete fusion of the fused...
The cover material is injected above, below, around or inside the substrate during the two shot injection molding process to form a complete part. This process can be done through multiple injections ...
The injection molding industry is a low-margin industry, which is a matter of public record. This, coupled with the low barrier to entry in the injection molding industry, where only a few injection m...
English
中文
